S50W – FHC S50 Series Acrylic Latex With Silicone – White – Compare to 321W

Description Other Details Compare to 321W Quick Curing Mildew Resistant Multi-Purpose Formula Easy Tooling and Easy Clean-Up / Odor Free Window & Door Frame Approved and Paintable Suitable for Installing Insulated Glass in Wood Frames Available in Two Popular Colors Excellent Flexibility, Kitchen and Bath Approved Interior and Exterior Use Overview S50 is a premium grade, multi-purpose, acrylic latex sealant. The addition of silicone polymer provides greater flexibility than other latex products. For best results, apply above 40deg F to reduce possible frost in joints. The product is engineered to provide excellent adhesion to vinyl, aluminum, wood, sheet metal, and most common building materials, without the need of a primer. S50 is ideal for use in the installation of windows, doors, trim work, tubs, sink stops, thresholds, and baseboards. As well as interior sealing of cultured marble and tile. Installers prefer it because the product cures rapidly to form a durable, tight, bond. Material/Construction Meets ASTM C-834, Cure Rate: 1/4″ bead per 24 hrs, VOC: <30 g/L less water and exempt solvents, Staining: None, Sag: None Hazard Statement Classification: This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Serious eye damage/eye irritation: Category 2 Emergency Overview: Signal word - Warning Hazard Statements: Causes serious eye irritation Appearance: Varies Physical State: Paste Liquid Odor: Latex Precautionary Statements - Prevention Wash face, hands and any exposed skin thoroughly after handling; Wear protective gloves/protective clothing/eye protection/face protection Surface Preparation The substrate must be clean, dry, frost-free, sound, and free of any oils, greases, incompatible sealers, paints, or coatings that may interfere with adhesion. Do not apply if surface is damp or contaminated. It is recommended to test all substrates prior to applications. How to Use For best results, ensure surface is clean. Cut nozzle to desired bead size, puncture inner seal. Apply with a caulking gun, forcing sealant onto the substrate, then tool if needed. Use backer rod or bond breaker tape to control and prevent three sided adhesion. Sealant thickness not to exceed 1/2". Sealant is ready to paint within two hours. Protect from water for 72 hours. During application clean excess material with water. Prevention Wash face, hands and any exposed skin thoroughly after handling. Wear Personal Protective Equipment (PPE) like protective gloves, protective clothing, and face protection. Wear eye/face protection. Precautions IF ON SKIN: Wash thoroughly with soap and water. If skin irritates or rash occurs, get medical attention. Remove contaminated clothing and wash before reuse. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do; continue rinsing. If eye irritation persists, get medical attention. IF SWALLOWED: Immediately call a Poison Center or doctor. DO NOT induce vomiting. Storage Material is to be stored under controlled dry environment (below 75deg F). Use within 12 Included With Twist-On Nozzle MORE INFORMATION Product Name: FHC S50 Series Acrylic Latex with Silicone - White Item No: S50W Weight: 1.000000 Select Your Color/Finish: White Case Quantity: 30 Compare To: 321W Custom Length: CUSTOM COLOR / CALL Hazardous Material: YES Minimum Order: 1 Each Product Length: 12" Product Weight: 10.1 Fl Oz. Product Width: 2"Warranty: Manufacturer/distributor will replace identified quantity of the product proved defective. User will determine the suitability of the product for its intended use and assumes all risk and liability in connection therewith. DOWNLOADS FHC S50 Safety Sheet (4517KB) FHC Sealant Guidelines Comparison Chart (120KB) FHC S50 Technical Data Sheet (26KB) FHC Sealant LEED Information (276KB) WARNING : This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Compare to: 321W