CSO135 Glass Simple 135 Sleeve-Over Clamp

Description Other Details Description Compare to SOGC135, SFC135, CS0C135 Glass to glass 135 degree clamp For 5/16 1/2 glass For use with tempered or tempered/laminated glass Sleeve over Does not require glass fabrication Nylon tipped Allen screws tighten clamp Solid brass Other Details Gaskets included Product Details The CSO135 sleeve over 135 degree glass clamp can be used to hold panels together as a silicone caulk joint cures. It also prevents the panels from moving apart or from being poorly aligned. Please note that these clamps cannot replace support bars or headers on a glass shower enclosure. Cleaning Your Glass Simple Hardware Dry hardware after use to minimize water spots and other discoloration. Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish. Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first. After washing, thoroughly rinse with clean warm water and buff dry. WARNING : This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Compare to: SOGC135, SFC135, CS0C135