Ebco Thick Door Hinge (For shutter thickness 18-30 mm)

DESCRIPTION

• Available in Full Overlay,Half Overlay & Inset.
• Max. Opening: 100.
• Max. Shutter size: 34″ x 22″(850mm x 550mm) for 2 hinges.
• Shutter Thickness: 18mm to 30mm.
• Shutter cavity: 40mm, 14 deep, 4mm from edge.
• Finish: Nickel Plated

SPECIFICATIONS:-

FITTING INSTRUCTIONS

• Drill out the cavity in the shutter as per the dimensions in Fig.1. Use ‘ebco’ Drilling jig. Do not chisel.
• Fit the cap into the shutter cavity and screwon the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
• Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
• Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
• By loosening the bracket screws, the shutter can slide horizontallyand also be pivoted for varying pressure.