BC90SL – Glass Simple Wall-Mount Clamp with Small Leg, Beveled Profile

Description Other Details Description Glass shower clamp with beveled edges For 3/8 1/2 glass For use with tempered or tempered/laminated glass Solid brass Attaches glass panel to adjoining surface at 90 A 3/4 hole must be drilled into the glass for installation Compare to SGC037 Other Details Edge: Beveled profile Compare to: SGC037 Technical Specifications Leave a 1/8 – 3/16 gap between the glass and the adjoining surface and seal this with silicone. Only tempered or laminated tempered glass may be used. Avoid using power tools during installation as these may damage the finish. A single set of gaskets is provided with the clamp and is intended for use with either 3/8 or 1/2 glass. Product Details This Glass Simple clamp has a small leg and is used to connect a fixed glass panel to an adjacent wall, floor, or ceiling at 90 degrees. The beveled profile coordinates with many of our other products. Cleaning Your Glass Simple Hardware Dry hardware after use to minimize water spots and other discoloration. Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish. Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first. After washing, thoroughly rinse with clean warm water and buff dry. WARNING : This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov Compare to: CBU6, BGC037, CPGTW2