Ebco EURO – Slow Motion Hinge with 2 hole Mounting Plate E-HSM1

SPECIFICATIONS:-

FITTING INSTRUCTIONS

• Drill out the cavity in the shutter as per the dimensions in Fig.1. Use ‘ebco’ Drilling jig. Do not chisel.
• Fit the cap into the shutter cavity and screwon the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
• Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
• Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
• By loosening the bracket screws, the shutter can slide horizontallyand also be pivoted for varying pressure.