Ebco Full Panel Quick Fit (Ht. 54,86,125mm) -FPQ – Set of 5 Pcs

• Specification
• Overview
• Application
• Shipping

• Model	Code	Height	Depth	Width	Extention	Max Load kgs	Finish
  Full Panel Quick Fit	FPQ54-40-40	54	400	400	325	25	Ivory
  FPQ54-40-45	54	400	450
  FPQ54-45-40	54	450	400	375
  FPQ54-45-45	54	450	450
  FPQ86-40-40	86	400	400	325
  FPQ86-40-45	86	400	450
  FPQ86-45-40	86	450	400	375
  FPQ86-45-45	86	450	450
  FPQ125-40-40	125	400	400	325
  FPQ125-40-45	125	400	450
  FPQ125-45-40	125	450	400	375
  FPQ125-45-45	125	450	450

  A (mm)	B (mm)	C (mm)	D (mm)
  54	71	52	32
  86	103	84	64
  125	142	123	96

  *If you have any specific question related to the product, please contact us.

• Special Features
  1. A unique new way to assemble a drawer by clipping on a matching back panel.
  2. This not only improves the look of the drawer but also saves valuable time during assembly and brings down cost.
  3. Tilt and remove capability with guiding.
  4. Auto closing of drawer
  5. Front fascia adjustment.
  6. Precision rollers for smooth running.
  7. ‘System 32’ compatible.
• Fitting Instructions
  1. Side gap of 15.5mm is required and acts as side panel of drawer (Fig.1).
  2. Eccentric Cam for front facia height adjustment provided in 86mm and 125mm height Full Panels with 6mm bottom track (Ref.Fig 2)
  3. 25.4mm clearance from top edge of drawer required to tilt and remove drawer (Refer Fig. 2).
  4. Fixed slide should be set by 2mm for ‘Auto-Closing’ (Fig. 2).
  5. Screws should be recessed to avoid fouling.
  6. Fixed slides should be fitted parallel and at equal heights to each other.
  7. Insert the Rear panel onto the Side panels through the key slot provided in the side panels (Ref. Fig.3).
  8. Place the bottom flap through the track provided in the Side panels and fix the front facia with the Bracket and insert the unit onto fixed slides which are fitted internal sides of cabinet (Ref. Fig.4).
• As per store shipping policy.

Caution
For efficiency and Durability

1. Strictly maintain side gap of 15.5mm per side
2. Fix slides are parallel and at equal height
3. Do not apply paint or polish