Regency Pivot – obsolete shower hardware

ObsoleteRegency shower suit pivots and blocks

Note the unique feature of this old series was the cut out in the glass – see gallery image

3D SLS printed part (currently in unfinished white – ready for you to paint or keep the white but we recommend adding a clear varnish to seal)

OPTIONS:

• SKU 3132 glass bracket
  • Sold singly (ADD number required)
  • DIMENSIONS: 56.47mm Long x 44mm High (Overall) x 12.56mm Wide (6.02mm gap between walls) – PIN: 14.66mm Long x 9.42mm Diameter
• SKU 3034 pivot set suits Regency Aqua also
  • Sold as a set (top and bottom)
  • DIMENSIONS:
    • Top: 56.55mm Long x 17.8mm high x 13.46mm Wide – 10.27mm Diameter Hole
    • Bottom: 56.6mm Long x 18.3mm High (22.22mm Overall) x 13.46mm Wide – 10.27mm Diameter Hole
    • Fixing hole distance (top & bottom): 33mm
    • 6mm deep rebate for the cut out

NOTES:

GALLERY images provided of original components in situ, thanks to our customer

As our original products are used up ,we are replacing with OUR 3D printed components using SLS print technology are not sealed and are
supplied in the raw print form. 3D printed SLS products can easily be
painted or dyed.

To paint: we recommend using White Knight – SQUIRTS which can be obtained
from any good hardware store, this is a paint and primer and works really
well on the 3D printed material.

To dye: we recommend Rit dyes which can be obtained from major
supermarkets, ensure you following the directions for usage.

Once you have painted or dyed the product, to the colour you desire, then a
clear sealant is recommended to protect the painted finish long term. By
sealing you are also protecting the white print finish from soiling. We
recommend Rust-oleum 2X clear spray which also can be obtained from major
hardware suppliers.